Adtzone.com - here's how to root How to Install TWRP and Root on Galaxy S6 Edge Android 6.0.1 Marshmallow. Samsung galaxy S6 Edge is the flagship product of the brand Samsung in 2015 in luncurkannya samsung galaxy before the new S7. Maybe you want more access rights for this ultimate Smartphone then you need to Root and install TWRP or CWM in samsung galaxy S6 Edge yours.
How to Install TWRP and Root on Galaxy S6 Edge Android 6.0.1 Marshmallow is a complete tutorial for those of you who are new in the smartphone mengkostum quite expensive.
Download Required File
- Download and install Samsung USB Drivers.
- Download and extract Odin3 v3.10.6.
- Download SpaceX-Kernel_MM.tar.md5 and TWRP-3.0_MM_ManhIT.tar.md5 carefully according to your device’s model number.
- Download SuperSU.APK file and copy it to your phone’s SD card.
- Download SuperSU.zip file and copy it to your phone’s SD card if you want to root via TWRP recovery. If are going to root using the kernel, then skip this step.
How to Install TWRP and Root on Galaxy S6 Edge Android 6.0.1 Marshmallow
- Make sure that you’ve installed Samsung USB drivers, downloaded and extracted Odin3 v3.10.6, and also downloaded the SpaceX-Kernel according to your device. Also make sure that you’ve copied the SuperSU.APK file to your phone.
- Now put your Galaxy S6 Edge in download mode. To do so, turn it off completely. Now turn it on by pressing and holding Volume Down + Home + Power Key. Once your phone boots up with a warning, press Volume Up Key to continue. Now your phone is in downloadmode. Connect it to your PC now.
- Now open Odin3.exe on your computer.
- Once Odin detects your phone in the download mode the, box ID:COM box will turn blue. If it doesn’t turn blue, then connect your phone properly first.
- The only options checked in Odin should be Auto-Reboot and F.Reset.Time. No other options should be touched.
- Now in Odin, click on the “AP” tab and select the downloaded SpaceX-kernel.tar.md5file.
- Click Start in Odin. It will flash the SpaceX-Kernel on your phone.
- Once the flashing is done, your phone will reboot.
- Once it boots up, go to the file manager and locate the copied SuperSU.APK file.
- Tap the APK file and follow on-screen instructions to install it.
- Reboot your phone now.
- That’s all. You can now install Root Checker to check root access on your phone. Best of luck.
How to Install TWRP and Root on Galaxy S6 Edge Android 6.0.1 Marshmallow Alternative
- Make sure that you’ve installed SpaceX Kernel on your phone using the method 1.Download the TWRP Recovery.tar.md5 file and copy it to your phone’s desktop.Download and copy SuperSU.zip file to your phone’s internal storage.
- Now put your Galaxy S6 Edge in download mode. To do so, turn it off completely. Now turn it on by pressing and holding Volume Down + Home + Power Key. Once your phone boots up with a warning, press Volume Up Key to continue. Now your phone is indownload mode. Connect it to your PC now.
- Now open Odin3.exe on your computer.
- Once Odin detects your phone in the download mode the, box ID:COM box will turn blue. If it doesn’t turn blue, then connect your phone properly first.
- The only options checked in Odin should be Auto-Reboot and F.Reset.Time. No other options should be touched.
- Now in Odin, click on the “AP” tab and select the downloaded TWRP Recovery.tar.md5file.
- Click Start in Odin. It will flash the TWRP Recovery on your phone.
- Once the flashing is done, your phone will reboot.
- Now turn off your phone and boot it into TWRP recovery using the 3 button combo i.e.Volume Up + Home + Power Key.
- Once it boots up into TWRP recovery, tap Install > Install Zip > Locate the copied SuperSU.zip file and flash it following on-screen instructions.
- Once done, reboot your phone.
- That’s all. You can now install Root Checker to check root access on your phone. Best of luck.
0 comments:
Post a Comment